• PRODUCTS
  • Pavement Sealers
  • Sealer Additives
  • Crack Fillers
  • Preparation & Repair
  • Traffic Paints
  • Concrete Products
  • Dust Suppressant
  • Equipment
  • Tools & Accessories
  • Sport Surfacing

• TECHNICAL INFO
  • Specifications
  • Engineering Specs
  • MSDS
  • Certificates
  • Pavement Maintenance 101

• RESOURCES
  • Credit Application
  • Tank Calculator
  • Classifieds

Crack Fillers

SealMaster®
Trowel Grade Crack Filler

High Performance
Fortified with mineral fillers for filling larger cracks up to 1" wide.

Sizes Available
5 Gallon Pail, 55 Gallon Drum

Coverage
Coverage is dependent upon depth and width of cracks. Typically, one gallon of crack filling material will fill approximately 75-150 feet of cracks depending on depth and width of cracks.

MSDS Sheet (PDF)

Specification Sheet (PDF)

Description
A mineral filled, rubberized asphalt emulsion designed for filling cracks exceeding 1/4" width in pavement surfaces.

Mixing Procedures
Stir well before using. Do not dilute, use as is.

Application
Work trowel grade crack filler down into crack using rectangular trowel, putty knife or hand held scraper. Material will set under good conditions in several hours, depending on weather and filler thickness.

Important
Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up
Wash tools in water before material dries.