• PRODUCTS
  • Pavement Sealers
  • Sealer Additives
  • Crack Fillers
  • Preparation & Repair
  • Traffic Paints
  • Concrete Products
  • Dust Suppressant
  • Equipment
  • Tools & Accessories
  • Sport Surfacing

• TECHNICAL INFO
  • Specifications
  • Engineering Specs
  • MSDS
  • Certificates
  • Pavement Maintenance 101

• RESOURCES
  • Credit Application
  • Tank Calculator
  • Classifieds

Preparation & Repair

Prep Seal™

Ready To Use Oil Spot Primer

• No dilution required.
• Apply by spray or brush.
• Available in 1 gallon and 5 gallon containers.

Sizes Available
1 gallon Jug, 5 gallon Pail

Coverage
Approximately 250-300 square feet per gallon depending on surface porosity.

MSDS Sheet (PDF)

Specification Sheet (PDF)

Description
A ready to use polymer based emulsion designed to seal oil, grease, and gasoline spots or stain prior to the application of pavement sealers over asphalt surfaces.

Surface Preparation
Scrape, wire brush, or burn off excessive build-up of oil, grease, and gasoline.

Mixing Procedures
Stir thoroughly. DO NOT DILUTE.

Application
Apply with brush, roller or spray. Allow Prep Seal to dry completely before applying pavement sealer.

Important
Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up
Wash tools in water before material dries.