• PRODUCTS
  • Pavement Sealers
  • Sealer Additives
  • Crack Fillers
  • Preparation & Repair
  • Traffic Paints
  • Concrete Products
  • Dust Suppressant
  • Equipment
  • Tools & Accessories
  • Sport Surfacing

• TECHNICAL INFO
  • Specifications
  • Engineering Specs
  • MSDS
  • Certificates
  • Pavement Maintenance 101

• RESOURCES
  • Credit Application
  • Tank Calculator
  • Classifieds

Crack Fillers

SealMaster®
Pourable Crack Sealant

The Industry Standard. An economical cold pour crack filler rubberized for added flexibility. Recommended for cracks up to 1/2" wide.

Sizes Available
1 Gallon Jug, 5 Gallon Pail, 55 Gallon Drum

Coverage
Coverage is dependent upon depth and width of cracks. Typically, one gallon of Pourable Crack Filler will fill approximately 75-150 feet of cracks.

MSDS Sheet (PDF)

Specification Sheet (PDF)

Description
Pourable Crack Sealant is a one component rubberized cold-applied asphalt emulsion crack sealant designed for filling cracks up to 1/2" wide in pavement surfaces. Pourable Crack Sealant provides a protective barrier against moisture intrusion into pavement surfaces. Pourable Crack Sealant is both economical and easy to use.

Mixing Procedures
Stir material thoroughly. Pourable Crack Sealant is a ready-to-use material. Do not dilute.

Application
Pour Crack Sealant into cracks and squeegee flush to adjoining pavement. Allow material to dry before opening to traffic.

Important
Pourable Crack Sealant shall not be applied when temperature is expected to drop below 50°F at any time within a 24 hour period after application. Be sure to wear eye protection

Clean Up
Wash tools in water before material dries.