• PRODUCTS
  • Pavement Sealers
  • Sealer Additives
  • Crack Fillers
  • Preparation & Repair
  • Traffic Paints
  • Concrete Products
  • Dust Suppressant
  • Equipment
  • Tools & Accessories
  • Sport Surfacing

• TECHNICAL INFO
  • Specifications
  • Engineering Specs
  • MSDS
  • Certificates
  • Pavement Maintenance 101

• RESOURCES
  • Credit Application
  • Tank Calculator
  • Classifieds

Preparation & Repair

PatchMaster™ - High Performance Pothole Patch

The cold patch with hot mix performance!

• Easy to Use - Simply pour from bag and tamp or drive over with car wheels.
• No heating required.
• PatchMaster can be applied in any weather.
• Fills potholes in both asphalt and concrete. Ideal for full depth repair.
• Packaged in 50 lb. weatherproof bags and 55 gallon drums.
• Ideal for roads, streets, parking lots, driveways, and other pavement surfaces.

Sizes Available
50 lb. Bag, 55 gallon Drum

Coverage
One 50 lb. bag of PatchMaster™ will cover approximately 5 square feet at 1" depth or 2.5 square feet at 2" depth.

MSDS Sheet (PDF)

Specification Sheet (PDF)

Description
PatchMaster™ is a cold-applied high performance pothole patch material. It is an all-weather material that can be used to fill potholes in wet or dry conditions. PatchMaster™ remains pliable at temperatures as low as -20°F.

Uses
A fast, economical, easy to use pothole patch for parking lots, driveways, roads, streets, and more.

Surface Preparation
Remove loose material, debris, snow, and standing water from pothole prior to application.

Mixing Procedures
Store PatchMaster™ Pothole Patch in warm area to enhance workability. PatchMaster™ is a ready to use product. Simply pour or shovel from container.

Application
Apply PatchMaster™ directly from bag. Fill to a height of 1/2" above surrounding pavement. Tamp or compact into place with hand tamper, roller, or car wheels.

Clean Up
Wash tools in water before material dries.