Home Site Map Careers Log In
Literature Videos News Contact Us Locations Locate Installers
Choose Sealcoating Contractors Property Managers Road Maintenance Sport Surfacing Architects/Engineers Franchise Opportunities



Go Back To Products Page

Traffic Paints

Liquid Thermoplastic

High Performance Traffic Marking Paint

  • Cold spray-applied thermoplastic featuring hot-applied thermoplastic performance.
  • Liquid Thermoplastic Traffic Marking Paint can be applied with standard airless spray equipment.

Sizes Available
5 Gallon Pail, 55 gallon Drum

155-180 ft. of 4-inch line per gallon at 30-35 Mils wet film thickness.

Colors Available
White Yellow Blue Red  

* Colors may vary slightly from actual product.

White - MSDS Sheet PDF (PDF)
Yellow - MSDS Sheet PDF (PDF)

Blue - MSDS Sheet PDF (PDF)
White - Specification Sheet PDF (PDF)
Yellow - Specification Sheet PDF (PDF)

Blue - Specification Sheet PDF (PDF)
Red - Specification Sheet PDF (PDF)

SealMaster® Liquid Thermoplastic Traffic Marking Paint is a high-performance, highly durable Waterborne traffic marking material. Unique patented cross linking technology provides durability normally associated with Hot-melt Thermoplastics and epoxies. SealMaster® Liquid Thermoplastics meets and exceeds the performance requirements of Federal Specification TTP-1952E, Type III. SealMaster® Liquid Thermoplastic can be applied with conventional spray equipment (with stainless steel components) to asphalt, concrete, or existing road markings that are adhering well to the pavement surface.

Mixing Procedures
Stir well before using. Do not dilute.

For maximum durability apply at a wet film thickness of 30-35 mils (155-180 ft. of 4-inch line per gallon). When applying at 30-35 wet mills, it is recommended that a larger particle size glass bead be used for optimum retroflectance and wet night visibility. A bead drop rate of approximately 7 lbs./gal. of paint for a 4-inch line and 30-35 mil thickness is a suitable range which can be fine tuned for optimum performance. The dry-to-no-pickup time for a 30-35 mil thickness application is typically 5 minutes or less depending on conditions. Liquid Thermoplastic can be applied with standard airless spray equipment with stainless steel components.

Apply to clean dry surface when surface and air temperature is not expected to drop below 50°F or exceed 120°F in a 24 hour period.

Clean Up
Wash tools in water before material dries.


Unit Size Unit Weight
View In Catalog 5 gal. Pail 72 lbs.
  55 gal. Drum 800 lbs.
  Spacer SealMaster Catalog SealMaster Catalog
SealMaster Locations
SealMaster Franchise Opportunities

Untitled Document
ProductsTechnical InfoResourcesLiteratureVideosNewsContact UsCatalogLocationsLocate Installers
Sealcoating ContractorProperty ManagerRoad MaintenanceSport SurfacingArchitect/EngineerFranchise Opportunities
HomeSite MapCareersLog In

Copyright © 2012 SealMaster,
All Rights Reserved