• PRODUCTS
  • Pavement Sealers
  • Sealer Additives
  • Crack Fillers
  • Preparation & Repair
  • Traffic Paints
  • Concrete Products
  • Dust Suppressant
  • Equipment
  • Tools & Accessories
  • Sport Surfacing

• TECHNICAL INFO
  • Specifications
  • Engineering Specs
  • MSDS
  • Certificates
  • Pavement Maintenance 101

• RESOURCES
  • Credit Application
  • Tank Calculator
  • Classifieds

Crack Fillers

GatorPave™

The Ready To Use Patching Material For Cracked & Alligatored Pavement Areas.

• No Heat Required - Cold Applied
• Easy To Use, Apply by Squeegee or Trowel
• Polymer Modified for Maximum Performance
• Environmentally Friendly Emulsion Based Formula

Sizes Available
5 Gallon Pail, 55 Gallon Drum

Coverage
Coverage is dependent upon depth and width of cracks. Typically, one gallon of crack filling material will fill approximately 75-150 feet of cracks.

MSDS Sheet (PDF)

Specification Sheet (PDF)

Description
GatorPave™ is a trowelable patching material that is ideal for repairing alligatored areas in asphalt surfaces, as well as cracks in excess of 1/4" wide.

Mixing Procedures
Stir material. Use as is. DO NOT DILUTE.

Application
Alligatored Areas: Apply by squeegee or trowel. Sand may be sprinkled over GatorPave™ to promote adhesion of pavement sealer.
Cracks: Fill cracks with trowel or U-shaped squeegee.

Important
GatorPave™ shall not be applied when temperature is expected to drop below 50°F at any time within a 24 hour period after application. Be sure to wear eye protection

Clean Up
Wash tools in water before material dries.