SealMaster
SealMaster
Home Site Map Careers Log In
Literature Videos News Contact Us Catalog Locations Locate Installers
Choose Pavement Maintenance Contractors Property Managers Road Maintenance Sport Surfacing Architects/Engineers Franchise Opportunities

 

 

Go Back To Products Page

Pavement Sealers

SealMaster® Dust Suppressant & Soil Stabilizer

The Environmentally Friendly, Non-Toxic Synthetic Polymer Emulsion

Sizes Available
55 Gallon Drum, 275 gallon Tote, Bulk

Coverage
SealMaster® Dust Suppressant and Soil Stabilizer is a synthetic polymer emulsion concentrate consisting of a compbination of carefully selected polymers designed specifically for dust palliative and soil stabilization applications. Provides superior bonding and stabilizing for lasting performance.



MSDS Sheet PDF (PDF) Specification Sheet PDF (PDF)

Description
SealMaster® Dust Suppressant and Soil Stabilizer is a synthetic polymer emulsion concentrate consisting of a combination of carefully selected polymers designed specifically for dust palliative and soil stabilization applications. It is safe, non-toxic and environmentally friendly. Provides superior bonding and stabilizing for lasting performance.

Uses
• Dust control and palliative for both traffic
• Sub-base stabilizer - mixed up to 6-inches deep and non-traffic applications
• Hydroseed and Mulch Tackifier
• Slope Erosion Control
• Stock Pile Sealant and Dust Cap
• Unpaved Road Stabilizer
• ADA Trails and Cart Paths
• Walking Path & Trail Stabilizer
Agricultural Roads
• Helicopter & Aircraft Runway Stabilizer
• Military Operations
• Quarries and Gravel Roads
• Construction Sites
• Heavy Haul Roads
• Gravel Parking Lot Stabilizer

Application
Topical Application:
For best results apply evenly with pressurized spray equipment, distributor trucks, spray trailers, or hand sprayers. Allow 24 hours for material to set before resuming traffic.

Full Depth Application:
Scarify, till or loosen dirt or gravel surface to a depth of 3 to 4 inches. Apply material with pressurized spray equipment. Two applications my be required to achieve recommended coverage rate. A grader may be used to level material prior to compacting with a roller. Once material has been rolled, a light application of material should be sprayed over the surface as a final lock down coat.

Important
Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up
Wash tools in water before material dries.

 


Catalog
Unit Size Unit Weight
View In Catalog 55 gal. Drum 535 lbs.
  275 gal. Tote 2,700 lbs.
  Spacer SealMaster Catalog SealMaster Catalog
Bar
SealMaster Locations
Bar
SealMaster Franchise Opportunities
Bar


Untitled Document
Copyright © 2011 SealMaster,
All Rights Reserved