Home Site Map Careers Log In
Literature Videos News Contact Us Locations Locate Installers
Choose Sealcoating Contractors Property Managers Road Maintenance Sport Surfacing Architects/Engineers Franchise Opportunities



Go Back To Products Page

Sealcoating Products

ColorPave Neutral Ready-Mix: Asphalt Driveway Paint | Basketball Court Paint | Blacktop Paint | Asphalt Color

ColorPave™ Neutral Ready-Mix

ColorPave™ beautifies and protects asphalt pavement surfaces including driveways, parking lots, walkways, golf cart paths, bike/jogging trails, amusement parks, basketball courts, and more. The durable, textured coating provides an ideal surface for driveways that double as a basketball court, or any multipurpose areas where asphalt color is desired.

The acrylic-based formula of ColorPave can be used as an asphalt driveway paint, but not on areas that have been sealcoated with a coal tar or asphalt based coating. ColorPave Ready-Mix comes pre-mixed with silica sand to fill voids in asphalt and provide a safe, non-skid area where blacktop paint or asphalt color is needed.

Sizes Available
5 gallon pail (4 gallon net)

Apply ColorPave™ at a rate of .13 to .15 gallon per square yard (60-70 square feet per gallon) per coat. Two coats are recommended for optimum performance. One pail will cover approximately 240-280 square feet per coat.

asphalt paint

ColorPave™ Neutral Ready-Mix is designed to be mixed with ColorPave™ HD Tint or ColorPlus™.

ColorPave™ HD Tint Colors Available:
Forest Green Light Green Terra Cotta Sahara Beige Brownstone
Red Brickyard Red Olivestone Graystone Burnt Sienna
Slate Gray Dove Gray Sandstone    

ColorPlus™ Colors Available:
Forest Green Light Green Dark Green Beige Brown
Red Maroon Tournament Purple Gray Blue
Light Blue Dove Gray Ice Blue Sandstone Yellow

* Colors may vary slightly from actual product.

MSDS Sheet PDF (PDF) Specification Sheet PDF (PDF)

ColorPave™ Neutral Ready-Mix is a 100% acrylic water based emulsion designed as a pavement color coating. ColorPave™ is fortified with sand for slip resistance. ColorPave™ is supplied in a neutral color designed to be mixed with ColorPave™ Tint (Pigment Dispersion) to achieve desired color. ColorPave™ Tint is supplied separately and is available in several color choices.

Surface Preparation
Surface must be clean from all oils, grease, loose material, dirt, and dust. Pavement surface repairs should be made with a suitable hot or cold asphalt mix. Cracks should be filled with SealMaster® or SportMaster® acrylic base crack filling products. DO NOT USE HOT APPLIED CRACK FILLING MATERIALS.

Mixing Procedures
Add one pint of ColorPave™ Tint to one 5-gallon pail (approx. 4-gallons) of ColorPave™ Neutral Ready-Mix. Mix thoroughly until Tint is completely dispersed into the Neutral Base. If needed, a small amount of water may be added to facilitate application.

ColorPave® shall be applied by squeegee, brush, roller, or specialized textured spray equipment.

Be sure to use OSHA approved respirator when applying this product. Temperatures must be above 50°F both during application and for aperiod of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up
Wash tools in water before material dries.

Asphalt Driveway Paint

Unit Size Unit Weight
View In Catalog 5 gal. pail 56 lbs.
  Spacer SealMaster Catalog SealMaster Catalog
SealMaster Locations
SealMaster Franchise Opportunities

Untitled Document
ProductsTechnical InfoResourcesLiteratureVideosNewsContact UsCatalogLocationsLocate Installers
Sealcoating ContractorProperty ManagerRoad MaintenanceSport SurfacingArchitect/EngineerFranchise Opportunities
HomeSite MapCareersLog In

Copyright © 2012 SealMaster,
All Rights Reserved