• PRODUCTS
  • Pavement Sealers
  • Sealer Additives
  • Crack Fillers
  • Preparation & Repair
  • Traffic Paints
  • Concrete Products
  • Dust Suppressant
  • Equipment
  • Tools & Accessories
  • Sport Surfacing

• TECHNICAL INFO
  • Specifications
  • Engineering Specs
  • MSDS
  • Certificates
  • Pavement Maintenance 101

• RESOURCES
  • Credit Application
  • Tank Calculator
  • Classifieds

ColorPave: Asphalt Color | Green Parking | Color Coating | Asphalt Paint

ColorPave™ Neutral Concentrate

Bring Color To Your Pavement!
ColorPave provides Color to asphalt surfaces including: Driveways, Parking Lots, Jogging/Bike Paths, Walkways, and more. ColorPave has color choices that can contribute to LEED credits and green parking. The 100% acrylic formula provides a durable surface that is free of oils that can track into your home or business, and doesn't have a strong pungent odor, like some pavement sealers. Many color choices are available by using ColorPave HD tint or SportMaster ColorPlus Pigment Dispersion.

Uses
ColorPave can be used on Asphalt, Stamped Asphalt, and existing acrylic surfaces. Decorative asphalt areas that were previously color coated with an acrylic-based coating can be resurfaced with ColorPave. Do not use ColorPave on previously sealcoated areas where Coal Tar and non-acrylic formulas were used.

ColorPave Neutral Concentrate is mixed with ColorPave HD Tint (or ColorPlus Pigment Dispersion), water, and sand to produce an asphalt color coating material.

Coverage
Yield calculations are based on undiluted gallons of Acrylic Resurfacer and will vary according to surface texture and porosity within the limits below:
.07 to .09 gallons per square yard per coat. Two coats are recommended.

MSDS Sheet (PDF)

Specification Sheet (PDF)

Description
ColorPave® Neutral Concentrate is a 100% acrylic water based emulsion pavement color coating. It is designed to be mixed with water, sand, and either ColorPave® HD Tint or ColorPlus pigment dispersion to achieve desired color.

Surface Preparation
Surface must be clean from all oils, grease, loose material, dirt, and dust. Pavement surface repairs should be made with a suitable hot or cold asphalt mix. Cracks should be filled with SealMaster or SportMaster acrylic base crack filling products. DO NOT USE HOT APPLIED CRACK FILLING MATERIALS.

Mixing Procedures
ColorPave® Neutral Concentrate: 55 gallons
Water: 33 gallons
ColorPlus or HD Tint: 4 gallons
Sand (50-60 mesh): 800 lbs.

Application
ColorPave® shall be applied by squeegee, brush, roller, or specialized textured spray equipment.

Important
Temperatures must be above 50°F both during application and for aperiod of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Clean Up
Wash tools in water before material dries.