• PRODUCTS
  • Pavement Sealers
  • Sealer Additives
  • Crack Fillers
  • Preparation & Repair
  • Traffic Paints
  • Concrete Products
  • Dust Suppressant
  • Equipment
  • Tools & Accessories
  • Sport Surfacing

• TECHNICAL INFO
  • Specifications
  • Engineering Specs
  • MSDS
  • Certificates
  • Pavement Maintenance 101

• RESOURCES
  • Credit Application
  • Tank Calculator
  • Classifieds

Preparation & Repair

Asphalt Binder™

An Asphalt Emulsion Tack Coat Designed For Priming Oxidized Surfaces And Patchwork.

Primer For:
• Asphalt Patching
• Asphalt Paving
• Coatings & Repair Products

Sizes Available
5 gallon Pail, 55 gallon Drum, Bulk

Coverage
Dependant upon water dilution.

MSDS Sheet (PDF)

Specification Sheet (PDF)

Description
Asphalt Binder™ is an anionic asphalt emulsion designed for use as a tack coat for patching, paving, and coating processes. Asphalt Binder™ promotes adhesion of bituminous concrete products and coatings. Asphalt Binder™ also meets the ISSA requirements for SS1h.

Uses
Asphalt Binder™ is designed as an adhesion promoter for patching, paving, and coatings.

Application
Apply properly mixed Asphalt Binder™ (Asphalt Binder™, Water) with spray equipment, brush, or squeegee. Stir material thoroughly before applying.

Mixing Procedures
• For Use As A Primer For Coatings: Apply properly diluted Asphalt Binder™ (1 part Asphalt Binder™, 8 parts water) at a rate of .07 - .10 gallon per square yard (90-130 square feet per gallon).

• For Use As A Tack Coat For Patching Or Paving: Apply properly diluted Asphalt Binder™ (1 part Asphalt Binder™, 1 part water) at a rate of .07 - .10 gallon of mix per square yard (90-130 square feet per gallon of mix).

Important
Apply coatings, patching materials, or paving materials as soon as possible after Asphalt Binder™ dries (within 24 hours) in order to maintain tackifying properties.

Clean Up
Wash tools in water before material dries.